Download Steel Designers' Manual - 6th Edition (2003)
Contents Civil Engineering:
1 Single- storey buildings
2 Multi- storey buildings
3 Industrial steel work
4 Bridges
5 Other structural applications of steel
6 Applied metallurgy of steel
7 Fracture and fatigue
8 Sustainability and steel construction
9 Introduction to manual and computer analysis
10 Beam analysis
11 Plane frame analysis
12 Applicable dynamics
13 Local buckling and cross-section classification
14 Tension members
15 Columns and struts
16 Beams
17 Plate girders
18 Members with compression and moments
19 Trusses
20 Composite deck slabs
21 Composite beams
22 Composite columns
23 Bolts
24 Welds and design for welding
25 Plate and stiffener elements in connections
26 Design of connections
27 Foundations and holding-down systems
28 Bearings and joints
29 Steel piles
30 Floors and or tho tropic decks
Introduction Steel Designers' Manual - 6th Edition (2003) :
At the instigation of the Iron and Steel Federation, the late Bernard Godfrey began work in 1952 on the first edition of the Steel Designers’ Manual. As principal author he worked on the manuscript almost continuously for a period of two years. On many Friday evenings he would meet with his co-authors, Charles Gray, Lewis Kent and W.E. Mitchell to review progress and resolve outstanding technical problems. A remarkable book emerged. Within approximately 900 pages it was possible for the steel designer to find everything necessary to carry out the detailed design of most conventional steel work. Although not intended as an analytical treatise, the book contained the best summary of methods of analysis then available.
The standard solutions, influence lines and formulae for frames could be used by the ingenious designer to disentangle the analysis of the most complex structure. Information on element design was intermingled with guidance on the design of both overall structures and connections. It was a book to dip into rather than read from cover to cover. However well one thought one knew its contents, it was amazing how often a further reading would give some useful insight into current problems. Readers forgave its idiosyncrasies, especially in the order of presentation.
How could anyone justify slipping a detailed treatment of angle struts between a very general discussion of space frames and an overall presentation on engineering workshop design? The book was very popular. It ran to four editions with numerous reprints in both hard and soft covers. Special versions were also produced for overseas markets. Each edition was updated by the introduction of new material from a variety of sources. However, the book gradually lost the coherence of its original authorship and it became clear in the 1980s that a more radical revision was required. After 36 very successful years it was decided to rewrite and re-order the book, while retaining its special character. This decision coincided with the formation of the Steel Construction Institute and it was given the task of coordinating this activity. A complete restructuring of the book was undertaken for the fifth edition, with more material on overall design and a new section on construction.
The analytical material was condensed because it is now widely available elsewhere, but all the design data were retained in order to maintain the practical usefulness of the book as a day to-day design manual. Allowable stress design concepts were replaced by limit state design encompassing BS 5950 for buildings and BS 5400 for bridges. Design examples are to the more appropriate of these two codes for each particular application.
 Contents Civil Engineering: 1 Single- storey buildings 2 Multi- storey buildings…){kind=link}
Comments
Post a Comment